General Terms and Conditions (T&C) DEN-JET NORDIC A/S

A. General Provisions

1. Applicability

DEN-JET NORDIC A/S enters into contracts exclusively on the basis of these General Terms and Conditions (T&C). These T&C apply to all deliveries, assembly services, and other services, including future transactions, even if they are not expressly referenced again. Any terms deviating from these T&C shall only be valid if expressly confirmed by us in writing. Terms and conditions of the purchaser that are not expressly accepted by us in writing shall not apply; no objection is required. Individually agreed arrangements with the purchaser shall take precedence over these T&C provided they are documented in writing. Any legally relevant declarations, notices, or communications to be made by the purchaser after contract conclusion (including deadlines or defect notifications) must be submitted in writing.


2. Quotations & Scope of Delivery / Service

All quotations issued by us are subject to change and non-binding. Documents accompanying quotations, such as drawings, illustrations, measurements, and weight data, are provided for reference only unless explicitly designated as binding. We retain all ownership and intellectual property rights in quotations, drawings, documents, and data in any format. Disclosure to third parties requires our prior consent. The content of our order confirmation shall exclusively determine the scope of delivery or services. Partial deliveries and partial services are permissible provided they are reasonable for the purchaser. Claims against us may only be assigned with our prior consent, except for payment claims owed by us to the purchaser.


3. Prices and Payment

All prices are net prices are excluding value-added tax (VAT), freight & packaging cost. Price adjustments are permissible where delivery or services occur more than four months after order confirmation and increased costs can be substantiated. Offsetting or retention rights may only be exercised against undisputed or legally established claims.


4. Delivery & Service Periods

Delivery and service dates specified in the order confirmation or otherwise agreed are binding, subject to timely receipt of all purchaser-provided documentation and compliance with payment and contractual obligations. Delays attributable to the purchaser extend agreed deadlines accordingly. Delivery deadlines are fulfilled when goods are ready for shipment. If goods are not collected for reasons attributable to the purchaser, storage fees of 0,5% of the net invoice value per commenced month may be charged, capped at 3%. Higher actual costs may be claimed. Assembly timelines shall be extended by idle or waiting periods not attributable to us. Unforeseeable events beyond our reasonable control (including operational disruptions, governmental measures, supply shortages, energy constraints or pandemics) shall suspend delivery and service obligations for the duration of the impediment. Where delivery and service become impossible, we shall be released from our obligations. Strikes or lockouts shall extend delivery or service periods ac rdingly. If delivery or service becomes impossible, contractual obligations shall cease. If delays become unreasonable under these circumstances, the purchaser may withdraw from the contract. Claims for damages are excluded. Where such circumstances occur at the purchaser’s premises, equivalent consequences apply to acceptance obligations. Goods externally sourced at the customer’s request, solely for completion of the purchaser’s order, cannot avoid contractual obligations. Both parties shall promptly inform each other of any disruptions affecting contractual obligations.


5. Limitation of Liability

The following liability limitations apply to contractual, tortious, and pre-contractual liability. The burden of proof for facts limiting or excluding liability rests with us. We are not liable for slight negligence in relation to non-material contractual obligations. For slight negligence involving material contractual obligations, liability is limited to foreseeable and typical contractual damages. Gross negligence relating to non-essential obligations is similarly limited. Essential obligations are those necessary for proper contract performance and upon which the purchaser may reasonably rely. We shall not be liable for any indirect, incidental, special, or consequential losses, including loss of profit, loss of business opportunities or loss of revenue. There is no limitation to liability for injury to life, body, or health. Statutory claims under the Product Liability Act remain unaffected. Product liability is limited to DKK 10.000.000. If the seller becomes subject to a third-party product liability claim, the purchaser shall indemnify seller for any such claims exceeding DKK 10.000.000.


6. Place of Performance, Jurisdiction, and Governing Law

The place of performance for all contractual obligations is in Denmark. Where the purchaser is a merchant or public-law entity, exclusive jurisdiction shall lie with the courts of DEN-JET’s choosing. Danish law applies exclusively.


B. Provisions Applicable to Deliveries

1. Transfer of Risk and Shipment

Unless otherwise agreed, all deliveries are made in accordance with DPU (Delivered at Place Unloaded), Incoterms® 2020. The seller is responsible for arranging and paying for transportation, including unloading at the agreed place of destination. If the buyer chooses to arrange and pay for transportation independently, the delivery shall be made under EXW (Ex Works), Incoterms® 2020, at the seller's premises. In this case, the buyer is responsible for all transportation costs and risks from the agreed collection point. The applicable Incoterm shall be specified in the order confirmation or invoice.


2. Retention of Title

Delivered goods remain our property until all payment obligations arising from the business relationship, including future claims, are fully satisfied. The purchaser may resell goods in the ordinary course of business. Claims arising from resale, including payment claims, are hereby assigned to us. We accept this assignment. Upon request, the purchaser shall notify its customers accordingly and disclose debtor details. The purchaser remains entitled to collect assigned claims unless payment default occurs or its creditworthiness deteriorates, in which case collection rights may be revoked. Pledging or securing goods owned by us is prohibited. In the event of third-party enforcement actions, the purchaser must notify us immediately and provide documentation. In case of breach of contractual obligations, we may withdraw from the contract and reclaim delivered goods.


3. Defects and Warranty Claims

A defect exists where the delivered item fails to meet agreed specifications or is unsuitable for pre-supposed or usual use. Items manufactured to purchaser approved drawings are deemed conforming if they match those drawings. Used equipment is supplied without warranty. Claims against suppliers of essential third-party components are assigned to the purchaser. Liability for such components arises only if out-of-court remedies against suppliers fail. We may remedy defects by repair or replacement. If remediation fails, the purchaser may reduce the price or withdraw from the contract where the defect is material. Upon withdrawal, goods must be returned and reasonable usage compensation paid. All remedial work is performed at a DEN-JET location. Additional costs due to relocation of goods are excluded unless agreed and consistent with intended use. Transport costs during remedial work are borne by the purchaser. Warranty claims expire after 12 months, unless statutory law mandates longer periods. Damages for defect-related losses are limited in accordance with Section A.5 (Limitation of Liability).


C. Warranty Terms

1. Duration and Conditions

New products are warranted against manufacturing defects for 12 months from delivery, capped at 1,000 operating hours. Whatever comes first.


2. Warranty Coverage

Warranty applies to components manufactured by us. Third-party components are covered by manufacturer warranties. Installation quality is warranted. We determine repair or replacement. Freight costs for replacement parts are covered by seller at the cheapest shipping method. For deliveries outside Europe, shipping is covered to nearest seaport or airport. Replacement parts are invoiced, but credit note is given, when parts are returned, inspected and warranty approved. Replaced components carry a new warranty of up to 12 months or 1,000 hours. Whatever comes first.


3. Warranty Exclusions and Purchaser Costs

Wear parts are excluded from warranty. Warranty is void:

  • in the event of improper use, installation or maintenance.
  • for use of unauthorized/incompatible accessories, tools or spare parts.
The purchaser bears transport, customs, travel, overtime, and off-hours labor costs.


D. Export Compliance

The purchaser shall not export, re-export, or use restricted goods in violation of applicable EU sanctions relating to Russia or Belarus. The purchaser shall implement controls to prevent circumvention by third parties and report any export compliance issues immediately. Violations constitute material breach and may result in contract termination and penalties up to 100% of contract value. The Purchaser may not purchase equipment that is incompatible with the emission laws of their country, except where such equipment is purchased exclusively for resale to countries with compatible emission regulations.